This robust nylon stock sheet offers exceptional durability and impact resistance. Its substantial thickness makes it ideal for demanding industrial applications requiring superior protection and wear resistance.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.653" |
| Length | 21" |
| Width | 18" |
Manufactured under strict quality controls, this nylon stock sheet exhibits superior tensile strength and abrasion resistance, making it suitable for high-stress environments. With precise dimensions of 0.653 inches thick, 21 inches in length, and 18 inches in width, it provides a reliable material for custom fabrication. Its inherent chemical resistance and low coefficient of friction further enhance its utility in material handling and protective applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the work surface is clean and free of debris. 2. Accurately measure and mark the desired cut lines on the nylon sheet. 3. Utilize appropriate cutting tools (e.g., industrial saw with a fine-tooth blade) for precise material removal.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for dense plastics. | Employ industrial-grade saws with specialized blades for plastics to prevent chipping and ensure clean cuts. |
| Overheating the material during cutting, leading to melting. | Maintain a consistent cutting speed and use adequate lubrication or cooling to dissipate heat. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Protective liners for shipping containers, Wear pads and guide rails for material handling equipment, Custom fabrication of impact-resistant components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||