This robust Nylon Stock Sheet offers exceptional durability and performance for demanding industrial environments. Its high-impact strength and chemical resistance make it a reliable choice for critical components and custom fabrication.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.909" |
| Length | 13" |
| Width | 41" |
Purpose-built for heavy-duty applications, this Nylon Stock Sheet leverages the inherent toughness and low friction coefficient of high-performance nylon. With precise dimensions of 0.909 inches thickness, 13 inches length, and 41 inches width, it is engineered for optimal material utilization in machining and fabrication. Its excellent abrasion resistance, coupled with good electrical insulating properties, makes it suitable for a broad spectrum of industrial uses including wear pads, bushings, and structural components where impact loads and chemical exposure are prevalent. The material's inherent resilience ensures longevity and consistent performance under stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface for installation is clean, dry, and free from debris. 2. Cut the nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Secure the fabricated component using fasteners or adhesives suitable for nylon and the intended application.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics, leading to chipping or melting. | Employ carbide-tipped blades or specialized plastic cutting tools for clean, precise cuts. |
| Over-tightening fasteners, causing stress concentrations and potential cracking. | Use washers and avoid overtightening; consider slotted holes for thermal expansion. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and guides, Bushings and bearings, Custom jigs and fixtures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||