This heavy-duty carbon steel stock sheet offers exceptional strength and rigidity. Measuring 0.492" thick, 26" in length, and 33" in width, it is engineered for demanding shipping and packaging applications.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.492" |
| Length | 26" |
| Width | 33" |
Manufactured under strict quality controls, this 0.492" thick carbon steel sheet boasts a nominal yield strength of 35,000 psi and a tensile strength of 50,000 psi, ensuring superior structural integrity. Its precise 26" x 33" dimensions provide a consistent and reliable surface for fabricating robust shipping crates, industrial pallets, and protective enclosures. The material's inherent toughness and resistance to impact make it suitable for protecting heavy or fragile goods during transit and storage.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare the substrate to be reinforced or enclosed. 2. Position the carbon steel sheet according to design specifications. 3. Secure the sheet using appropriate welding, bolting, or fastening methods.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Underestimating load bearing requirements, leading to structural failure. | Consult engineering load charts or perform structural analysis to ensure material selection meets or exceeds anticipated loads. |
| Inadequate corrosion protection for exposed environments. | Apply suitable protective coatings (e.g., primer, paint, galvanization) to mitigate rust and degradation, especially in humid or corrosive conditions. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Heavy-duty shipping crates, Industrial pallets and skids, Protective enclosures for machinery, Reinforcement for load-bearing structures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||