This deep groove ball bearing, crafted from lightweight yet robust Aluminum 6061, offers exceptional performance in power transmission systems. Its precise dimensions ensure smooth operation and reduced friction.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 89mm |
| Outside Diameter | 70mm |
| Width | 7mm |
Built to exacting engineering tolerances, this deep groove ball bearing features an 89mm inside diameter, a 70mm outside diameter, and a 7mm width. The Aluminum 6061 alloy provides excellent corrosion resistance, good machinability, and a favorable strength-to-weight ratio, making it ideal for applications where weight reduction is critical or in environments prone to mild corrosive elements. Its design allows for high rotational speeds and accommodates both radial and axial loads, making it suitable for a wide range of dynamic power transmission components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seat and shaft are clean and free from debris. 2. Carefully press the bearing onto the shaft or into the housing using appropriate tooling to avoid distortion. 3. Verify smooth rotation after installation and apply initial lubrication if required by the application.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during press-fit, leading to cage deformation or race damage. | Utilize a bearing press or induction heater for controlled and even force application. Ensure correct sizing of the shaft and housing bore. |
| Incorrect lubrication, leading to premature wear or overheating. | Consult the bearing manufacturer's recommendations for the appropriate lubricant type, quantity, and re-lubrication intervals based on operating conditions. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: Electric motor shafts, Conveyor systems, Industrial automation equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||