This deep groove ball bearing, constructed from lightweight yet robust Aluminum 6061, offers exceptional performance in power transmission systems. Its precise dimensions ensure smooth operation and reduced friction.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 39mm |
| Outside Diameter | 125mm |
| Width | 17mm |
Engineered for reliability and performance, this deep groove ball bearing features an inside diameter of 39mm, an outside diameter of 125mm, and a width of 17mm. The 6061 aluminum alloy construction provides a favorable strength-to-weight ratio, excellent corrosion resistance, and good machinability, making it suitable for environments where weight is a critical factor or where galvanic corrosion with other aluminum components is a concern. This bearing is designed for moderate radial and axial loads, ensuring efficient power transfer in rotational applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean both the bearing bore and shaft seating area to remove any contaminants. 2. Carefully press the bearing onto the shaft, ensuring it is seated squarely and to the specified depth. 3. Install the bearing into the housing, again ensuring proper alignment and seating.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, potentially damaging the bearing races or cage. | Use a bearing press or appropriate induction heater for controlled installation. Avoid hammering the bearing directly. |
| Incorrect shaft or housing fit, leading to premature wear or bearing failure. | Verify that the shaft and housing dimensions meet the recommended fit tolerances for the specific bearing and application. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: Lightweight industrial machinery, Aerospace components, Automotive subsystems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||