This Deep Groove Ball Bearing is engineered for exceptional performance in power transmission systems. Constructed from lightweight and corrosion-resistant Aluminum 6061, it offers reliable operation in diverse environments.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 70mm |
| Outside Diameter | 68mm |
| Width | 42mm |
Specified by design engineers worldwide, this Deep Groove Ball Bearing features a nominal inside diameter of 70mm and an outside diameter of 68mm, with a width of 42mm. The choice of Aluminum 6061 as the primary material provides superior corrosion resistance and a significantly reduced weight compared to steel alternatives, making it ideal for applications where mass reduction is critical. This alloy also offers good strength-to-weight ratio, ensuring operational integrity under moderate loads. Its precise dimensional tolerances guarantee smooth rotational performance and minimal energy loss in power transmission components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing and shaft surfaces are clean and free from debris. 2. Gently press the bearing onto the shaft or into the housing, ensuring it is seated squarely. 3. Verify free rotation of the bearing after installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Forcing the bearing during installation, leading to race distortion. | Use a proper bearing press or induction heater for controlled installation, applying force only to the race being fitted. |
| Incorrect lubrication or lack thereof, causing premature wear. | Apply the specified lubricant type and quantity for the operating conditions prior to and during installation. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: Lightweight industrial machinery, Aerospace components, Automotive power transmission systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||