This deep groove ball bearing, constructed from lightweight and corrosion-resistant Aluminum 6061, offers exceptional performance in power transmission. Its robust design ensures smooth operation and longevity in demanding environments.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 82mm |
| Outside Diameter | 33mm |
| Width | 17mm |
Engineered for reliability and performance, this deep groove ball bearing features an inside diameter of 82mm, an outside diameter of 33mm, and a width of 17mm. Fabricated from Aluminum 6061, it provides a superior strength-to-weight ratio and excellent corrosion resistance, making it ideal for applications where weight reduction and environmental durability are critical. The precise internal geometry ensures low friction and efficient power transfer, suitable for high-speed rotational components and moderate axial loads.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing and shaft are clean and free from debris. 2. Carefully press the bearing onto the shaft or into the housing, applying uniform pressure to the outer or inner ring, respectively. 3. Verify smooth rotation and check for any binding or abnormal noise.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the wrong race during installation. | Always apply mounting force to the ring that is being fitted to the shaft or housing, never to the opposite race. |
| Overheating the bearing during press-fitting, especially with aluminum housings. | Utilize controlled heating methods or a bearing induction heater at appropriate temperatures to avoid material deformation or damage. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: Electric Motors, Pumps, Conveyor Systems, Industrial Machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||