This deep groove ball bearing, constructed from high-grade carbon steel, offers exceptional load-bearing capacity and smooth operation. Its precise dimensions ensure optimal integration into power transmission systems.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 95mm |
| Outside Diameter | 168mm |
| Width | 10mm |
Specified by design engineers worldwide, this deep groove ball bearing features an inside diameter of 95mm, an outside diameter of 168mm, and a width of 10mm. Manufactured from robust carbon steel, it exhibits excellent hardness, wear resistance, and compressive strength, making it ideal for applications experiencing significant radial and axial loads. The raceway geometry is optimized for minimal friction and extended service life under demanding operational conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mounting surfaces are clean and free of debris. 2. Carefully align the bearing with the shaft and housing, avoiding any cocking. 3. Apply appropriate lubrication as per manufacturer guidelines before seating.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation. | Utilize a proper bearing installer or press, applying force to the ring being mounted (inner ring to shaft, outer ring to housing). |
| Improper shaft or housing fit. | Verify that the shaft and housing have the recommended interference or clearance fits to prevent premature bearing failure. |
A: This Deep Groove Ball Bearing is manufactured from Carbon Steel.
A: Electric Motors, Gearboxes, Pumps.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||