This robust deep groove ball bearing, constructed from durable carbon steel, is designed for high radial and axial load capacities. Its precise dimensions ensure smooth, low-friction operation in a wide range of power transmission applications.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 94mm |
| Outside Diameter | 44mm |
| Width | 15mm |
Engineered for reliability and performance, this carbon steel deep groove ball bearing features an inside diameter of 94mm, an outside diameter of 44mm, and a width of 15mm. The high-carbon steel construction provides excellent hardness and wear resistance, suitable for operating in moderate temperature ranges and under consistent load. Its symmetrical design allows for the accommodation of both radial and axial loads in either direction, making it a versatile component in dynamic power transmission systems. The tight tolerances ensure minimal play and vibration, contributing to extended equipment lifespan and operational efficiency.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure bearing seating surfaces are clean and free from debris. Clean both the bearing bore and the shaft, as well as the housing bore. 2. Carefully mount the bearing onto the shaft, applying even pressure. Avoid striking the bearing directly; use a suitable bearing installer or press. 3. Once the inner ring is seated, position the bearing within the housing, again applying even pressure to avoid damage. Ensure proper clearance and alignment before final assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force directly to the bearing races or cage during installation. | Always apply mounting force to the ring that is being press-fitted. Use appropriate bearing installation tools such as induction heaters, presses, or sleeves. |
| Improper lubrication before or during installation. | Ensure the bearing is adequately lubricated with the specified lubricant for the application. Verify lubricant type and quantity before and during installation. |
| Contaminating the bearing during handling or installation. | Keep bearings in their original packaging until ready for installation. Handle with clean gloves and ensure the installation environment is free of dust and debris. |
A: This Deep Groove Ball Bearing is manufactured from Carbon Steel.
A: Electric Motors, Gearboxes, Conveyor Systems, Pumps.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||