This robust deep groove ball bearing, constructed from high-grade carbon steel, offers exceptional load-bearing capacity and smooth rotational performance. Engineered for durability in demanding power transmission systems.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 27mm |
| Outside Diameter | 145mm |
| Width | 42mm |
Specified by design engineers worldwide, this deep groove ball bearing features a precise 27mm inside diameter, a substantial 145mm outside diameter, and a 42mm width. Manufactured from premium carbon steel, it exhibits excellent hardness, wear resistance, and compressive strength, ensuring reliable operation under significant radial and axial loads. Its robust construction minimizes friction and heat generation, contributing to extended service life and enhanced operational efficiency in high-speed and heavy-duty applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seat and shaft are clean and free of debris. 2. Carefully press the bearing onto the shaft or into the housing, applying uniform pressure to the correct ring (inner for shaft mounting, outer for housing mounting). 3. Verify smooth rotation and proper seating before full load application.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force to the wrong ring during installation. | Always apply force to the stationary ring to avoid deforming the bearing races or cages. |
| Improper lubrication or using incorrect lubricant type. | Refer to lubricant compatibility charts for carbon steel bearings and ensure adequate fill levels based on operating conditions. |
A: This Deep Groove Ball Bearing is manufactured from Carbon Steel.
A: Industrial Gearboxes, Electric Motors, Conveyor Systems, Automotive Drivetrains.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||