This deep groove ball bearing, constructed from robust carbon steel, offers exceptional durability and smooth operation. Its precise dimensions ensure optimal performance in power transmission systems requiring reliable load support and reduced friction.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 93mm |
| Outside Diameter | 100mm |
| Width | 8mm |
Precision-manufactured to tight tolerances, this deep groove ball bearing (93mm ID x 100mm OD x 8mm W) is forged from high-quality carbon steel, offering excellent hardness and wear resistance. The hardened raceways and balls are designed for superior load-carrying capacity and extended service life under radial and axial loads. Its compact design makes it ideal for space-constrained power transmission applications, including gearboxes, electric motors, and conveyor systems. The material's inherent strength ensures consistent performance across a wide operating temperature range, minimizing the risk of premature failure and maximizing operational efficiency.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seat and shaft are clean and free from debris. Verify dimensions match precisely. 2. Carefully press the bearing onto the shaft or into the housing using appropriate tooling. Apply force evenly to the ring that is being fitted. 3. Secure the bearing in place with retaining rings or other designated locking mechanisms as per the equipment's design.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force or impact during installation, leading to brinelling or deformation of the raceways. | Use a proper bearing press or induction heater for installation. Apply force only to the ring being fitted, not across the entire bearing. |
| Incorrect shaft or housing fit, resulting in premature wear or bearing seizure. | Ensure the shaft and housing have the correct interference or clearance fits as specified by the equipment manufacturer. |
A: This Deep Groove Ball Bearing is manufactured from Carbon Steel.
A: Electric Motors, Gearboxes, Conveyor Systems, Pumps, Industrial Machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||