This high-performance deep groove ball bearing, constructed from durable carbon steel, offers exceptional radial and axial load capabilities for essential power transmission systems.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 92mm |
| Outside Diameter | 45mm |
| Width | 30mm |
A proven choice for industrial professionals, this deep groove ball bearing features a precise 92mm inside diameter, a 45mm outside diameter, and a 30mm width. Manufactured from robust carbon steel, it provides excellent hardness and wear resistance, ensuring longevity under demanding operating conditions. Its symmetric design allows for the accommodation of both radial and axial loads, making it suitable for a wide array of power transmission applications where smooth, low-friction rotation is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing and shaft are clean and free of debris. 2. Carefully press or gently tap the bearing onto the shaft or into the housing, ensuring it seats squarely. 3. Verify free rotation and proper lubrication before engaging the equipment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper alignment during installation leading to premature wear. | Use alignment tools or ensure precise mounting surfaces to guarantee axial and radial alignment. |
| Over-tightening the bearing during assembly, causing brinelling or distortion. | Apply appropriate force for seating and utilize torque specifications if available; avoid hammering directly on the bearing races. |
A: This Deep Groove Ball Bearing is manufactured from Carbon Steel.
A: Electric Motors, Gearboxes, Conveyor Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||