This deep groove ball bearing, constructed from corrosion-resistant Aluminum 6061, is engineered for demanding power transmission tasks. Its robust design ensures reliable operation under significant radial and axial loads.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 22mm |
| Outside Diameter | 189mm |
| Width | 45mm |
Purpose-built for heavy-duty applications, this deep groove ball bearing boasts an Inside Diameter of 22mm, an Outside Diameter of 189mm, and a Width of 45mm. Fabricated from Aluminum 6061-T6, it offers an excellent strength-to-weight ratio and superior resistance to corrosion, making it ideal for environments where traditional steel bearings may degrade. This material choice also contributes to reduced overall system weight. Its precision engineering ensures smooth, low-friction operation crucial for efficient power transmission in machinery such as industrial conveyors, heavy-duty pumps, and large gearboxes.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing and shaft are clean and free from debris. 2. Carefully press the bearing onto the shaft or into the housing using appropriate tools to avoid deforming the races. 3. Secure the bearing using retaining rings or other specified locking mechanisms, ensuring proper axial and radial alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force or improper tools during installation, leading to brinelling or race distortion. | Utilize a bearing press or induction heater for controlled and even application of force. Never hammer directly on bearing rings. |
| Insufficient lubrication or using the wrong type of lubricant for the operating conditions. | Consult the bearing manufacturer's specifications for recommended lubricant type and re-greasing intervals. Ensure uniform grease distribution. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: Industrial Conveyor Systems, Heavy-Duty Pump Shafts, Large Gearbox Assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||