This robust deep groove ball bearing, crafted from high-grade carbon steel, offers exceptional load-carrying capacity and smooth rotational performance. Ideal for demanding power transmission applications.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 86mm |
| Outside Diameter | 132mm |
| Width | 27mm |
Precision-manufactured to tight tolerances, this 86mm bore (ID) x 132mm OD x 27mm width deep groove ball bearing is constructed from premium carbon steel. This material ensures superior hardness, excellent wear resistance, and high tensile strength, making it suitable for moderate to heavy radial and axial loads. Its design minimizes friction, contributing to extended operational life and reduced energy consumption in dynamic systems. The cage design, typically made from pressed steel or polyamide, ensures accurate ball separation and guidance for optimal performance across a wide range of speeds and operating temperatures.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the bearing and mating shaft/housing surfaces thoroughly. 2. Carefully press the bearing onto the shaft or into the housing using an appropriate bearing installer or press. 3. Ensure proper alignment and support during installation to avoid damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying impact force directly to the bearing's inner or outer ring. | Use a bearing installer tool and apply force evenly to the ring being pressed. |
| Installing a dirty or contaminated bearing. | Keep bearings in their original packaging until installation and ensure all surfaces are clean. |
A: This Deep Groove Ball Bearing is manufactured from Carbon Steel.
A: Electric Motors, Gearboxes, Pumps.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||