This premium deep groove ball bearing, constructed from aerospace-grade Aluminum 6061, offers exceptional corrosion resistance and lightweight design. Optimized for efficient power transmission, it ensures smooth operation in demanding environments.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 73mm |
| Outside Diameter | 48mm |
| Width | 30mm |
Manufactured under strict quality controls, this deep groove ball bearing boasts a precise 73mm inside diameter, 48mm outside diameter, and a 30mm width. The Aluminum 6061 alloy provides superior strength-to-weight ratio and excellent resistance to common industrial corrosives, making it ideal for environments where traditional steel bearings may degrade. Its inherent non-magnetic properties also lend themselves to specialized applications. Designed for optimal load distribution and reduced friction, this bearing is engineered for long service life and consistent performance in various power transmission systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure bearing seating surfaces are clean and free from debris. 2. Carefully press the bearing onto the shaft or into the housing using appropriate tooling to avoid direct impact on the inner or outer race. 3. Verify proper seating and smooth rotation before applying load.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, leading to race distortion. | Utilize a bearing press or induction heater for controlled and even force application. |
| Incorrect shaft or housing fit, causing premature wear or bearing seizure. | Ensure the recommended interference or clearance fit is maintained as per engineering specifications. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: Electric Motor Shafts, Conveyor Systems, Industrial Pumps.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||