Engineered for superior performance in power transmission systems, this deep groove ball bearing boasts a lightweight yet robust Aluminum 6061 construction. It ensures smooth, low-friction rotation and reliable load-bearing capacity for critical applications.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 83mm |
| Outside Diameter | 178mm |
| Width | 29mm |
Built to exacting engineering tolerances, this deep groove ball bearing features an 83mm inside diameter, 178mm outside diameter, and a 29mm width. Constructed from Aluminum 6061, it offers excellent corrosion resistance and a high strength-to-weight ratio, making it ideal for applications where weight reduction and environmental durability are paramount. Its design accommodates both radial and axial loads, ensuring efficient power transfer and extended service life in diverse industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mounting surfaces are clean and free of debris. Inspect bearing for any shipping damage. 2. Carefully press the inner ring onto the shaft, ensuring a snug and perpendicular fit. Use a press or appropriate bearing heater for controlled mounting. 3. Gently seat the outer ring into its housing, again ensuring a perpendicular and consistent fit. Avoid applying excessive force that could damage the races or rolling elements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper shaft or housing fit (too loose or too tight) | Verify shaft and housing dimensions against bearing specifications. Use appropriate mounting techniques (press fit, thermal expansion) to achieve correct interference or clearance. |
| Contamination during installation | Install in a clean environment. Keep bearing sealed until immediately before installation. Use clean tools and handling procedures. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: Electric Motors, Gearboxes, Conveyor Systems, Automotive Drivetrains.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||