This precision-engineered Deep Groove Ball Bearing, constructed from lightweight yet robust Aluminum 6061, offers exceptional radial and axial load capacity. Its specific dimensions make it ideal for compact power transmission systems requiring smooth, low-friction operation.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 82mm |
| Outside Diameter | 52mm |
| Width | 9mm |
Engineered for reliability and performance, this deep groove ball bearing boasts an 82mm inside diameter and a 52mm outside diameter, with a 9mm width. Constructed from Aluminum 6061, it provides excellent corrosion resistance and a favorable strength-to-weight ratio, making it suitable for environments where weight reduction and material integrity are paramount. The precise internal geometry ensures optimal load distribution and reduced friction, contributing to extended service life and efficient power transfer in demanding industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing and shaft are clean and free of debris. 2. Carefully press the bearing onto the shaft, ensuring it is seated squarely. 3. Mount the assembly into the housing, applying even pressure.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Forcing the bearing onto a dirty shaft or housing. | Thoroughly clean both the bearing seating surfaces on the shaft and within the housing before installation. |
| Applying uneven pressure during press-fitting. | Use an appropriate press tool and ensure consistent, even force is applied to the bearing's inner ring to avoid misalignment and damage. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: Electric Motor Shafts, Gearbox Assemblies, Conveyor Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||