Engineered for optimal performance in power transmission systems, this deep groove ball bearing features a robust Aluminum 6061 construction. Its precise dimensions ensure smooth operation, reduced friction, and extended service life in demanding industrial environments.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 82mm |
| Outside Diameter | 186mm |
| Width | 35mm |
Precision-manufactured to tight tolerances, this deep groove ball bearing boasts an inside diameter of 82mm, an outside diameter of 186mm, and a width of 35mm. Constructed from Aluminum 6061, it offers superior corrosion resistance and a lightweight profile, making it ideal for applications where weight reduction is critical. This material also provides good thermal conductivity and moderate strength, suitable for moderate load conditions in rotational applications. Its design minimizes friction and vibration, contributing to enhanced system efficiency and longevity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mounting surfaces are clean and free of debris. 2. Carefully press the bearing into the housing, applying even pressure to the outer ring. 3. Verify that the shaft is properly seated within the inner ring and secure as per system design.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force to the inner ring during press-fit installation into a housing. | Always apply force to the outer ring when pressing a bearing into its housing to avoid damaging the bearing's internal components. |
| Improper shaft alignment leading to premature wear. | Ensure the shaft is perfectly aligned with the bearing bore before and during operation to prevent eccentric loading and reduce stress. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: Electric Motors, Gearboxes, Conveyor Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||