This robust Deep Groove Ball Bearing, crafted from lightweight Aluminum 6061, offers exceptional performance in power transmission systems. Its precise dimensions ensure smooth operation and reliable load bearing.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 80mm |
| Outside Diameter | 22mm |
| Width | 32mm |
A proven choice for industrial professionals, this Deep Groove Ball Bearing features an 80mm inside diameter, a 22mm outside diameter, and a 32mm width. Constructed from Aluminum 6061, it provides excellent corrosion resistance and a favorable strength-to-weight ratio, making it ideal for applications where weight reduction and environmental resilience are critical. The hardened steel raceways and balls ensure durability and smooth rotational movement under moderate radial and axial loads. Typical uses include conveyor systems, electric motors, and pump assemblies where a non-magnetic or lightweight bearing is advantageous.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the housing and shaft thoroughly to remove any debris or lubricant. 2. Carefully align the bearing with the shaft and housing, ensuring no tilting. 3. Apply even pressure to the outer ring for installation onto the shaft or into the housing, using appropriate tools to avoid damaging the bearing components.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the inner ring when pressing the bearing onto the shaft. | Always apply installation force to the ring that is being fitted – typically the inner ring when mounting on the shaft, and the outer ring when mounting in the housing. |
| Using excessive force or impact during installation, leading to brinelling of the raceways. | Utilize a controlled press or appropriate bearing installation tools to apply gradual, even pressure. Avoid hammering the bearing directly. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: Conveyor Systems, Lightweight Electric Motors, Pump Assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||