This robust deep groove ball bearing, constructed from lightweight yet strong Aluminum 6061, offers exceptional performance in power transmission systems. Its precise dimensions ensure smooth operation and reduced friction.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 36mm |
| Outside Diameter | 146mm |
| Width | 23mm |
Trusted by engineers across multiple sectors, this deep groove ball bearing boasts an inside diameter of 36mm, an outside diameter of 146mm, and a width of 23mm. Fabricated from Aluminum 6061, it offers excellent corrosion resistance and a favorable strength-to-weight ratio, making it ideal for applications where weight reduction and durability are critical. Its raceways are hardened for superior load-bearing capacity and extended service life, ensuring reliable performance in demanding industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mounting surfaces are clean and free of debris. 2. Carefully press the bearing onto the shaft, applying even force to the inner ring. 3. Secure the bearing in the housing, verifying proper seating and alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the outer ring during shaft installation. | Always apply press force exclusively to the inner ring when mounting on the shaft to prevent damage to the raceways and balls. |
| Overtightening retaining components. | Tighten any locking collars or set screws to the manufacturer's recommended torque to avoid deforming the bearing or shaft. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: Industrial Gearboxes, Electric Motors, Conveyor Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||