This robust deep groove ball bearing, crafted from durable carbon steel, offers exceptional performance in power transmission systems. Engineered for smooth operation and extended service life, it minimizes friction and withstands significant radial and axial loads.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 77mm |
| Outside Diameter | 54mm |
| Width | 15mm |
Built to exacting engineering tolerances, this deep groove ball bearing boasts an inside diameter of 77mm, an outside diameter of 54mm, and a width of 15mm. Constructed from high-quality carbon steel, it provides superior hardness and wear resistance, ensuring consistent operational efficiency. Its design accommodates both radial and axial loads, making it ideal for demanding applications in machinery where reliability and longevity are paramount. The precise raceway geometry and tight dimensional control contribute to reduced vibration and noise, enhancing overall system performance and user experience.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing and shaft are clean and free from debris. 2. Carefully mount the bearing onto the shaft using appropriate press-fitting or heating techniques, ensuring it is seated squarely. 3. Install the bearing into the housing, again ensuring proper alignment and seating.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Forcing the bearing onto a dirty or misaligned shaft. | Thoroughly clean both the shaft and housing. Use a bearing installer or appropriate tools to ensure square and even pressure during mounting. |
| Using excessive force, leading to brinelling or damage to the raceways. | Apply force only to the ring being mounted (inner ring on shaft, outer ring in housing). Utilize a bearing press or induction heater for controlled mounting. |
A: This Deep Groove Ball Bearing is manufactured from Carbon Steel.
A: Electric Motors, Gearboxes, Conveyor Systems, Pumps.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||