This deep groove ball bearing, constructed from robust carbon steel, offers exceptional load-bearing capacity and smooth rotational performance. Engineered for demanding power transmission applications, it ensures reliable operation and extended service life.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 75mm |
| Outside Diameter | 117mm |
| Width | 22mm |
Manufactured under strict quality controls, this deep groove ball bearing features a 75mm inside diameter, 117mm outside diameter, and a 22mm width. Crafted from high-carbon steel, it provides superior hardness, wear resistance, and load-carrying capability. Its symmetrical design allows it to accommodate both radial and axial loads in either direction, making it ideal for applications requiring high speeds and minimal friction. The raceway geometry is optimized for reduced vibration and noise, contributing to overall system efficiency and longevity in various industrial machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure bearing seating surfaces are clean and free from debris. 2. Apply a thin, even layer of appropriate lubricant to the shaft and inner ring. 3. Carefully press the bearing onto the shaft, ensuring it is seated fully and squarely. Avoid hammering directly on the bearing rings.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, leading to brinelling or damage. | Use a proper bearing press or induction heater for installation. Ensure even pressure is applied to the inner ring only. |
| Incorrect lubrication, leading to premature wear or seizure. | Consult the bearing manufacturer's specifications for the correct type and quantity of lubricant. Ensure re-lubrication intervals are maintained. |
A: This Deep Groove Ball Bearing is manufactured from Carbon Steel.
A: Electric Motors, Gearboxes, Conveyor Systems, Pumps.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||