This robust Deep Groove Ball Bearing, constructed from high-grade carbon steel, delivers exceptional load-bearing capacity and smooth rotational performance for critical power transmission systems. Engineered for durability and longevity.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 74mm |
| Outside Diameter | 63mm |
| Width | 34mm |
A high-performance industrial component, this deep groove ball bearing features a precise inside diameter of 74mm and an outside diameter of 63mm, with a robust width of 34mm. Manufactured from high-carbon steel, it offers excellent hardness, wear resistance, and tensile strength, ensuring superior performance under significant radial and axial loads. Its hardened raceways and precision-ground balls minimize friction and heat generation, contributing to extended service life and operational efficiency in applications such as electric motors, pumps, and industrial machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seat and shaft are clean and free from debris. Verify shaft diameter matches the inner ring bore tolerance. 2. Carefully press the bearing onto the shaft or into the housing using a bearing installer or appropriate press, applying even pressure to the inner ring for shaft mounting or the outer ring for housing mounting. 3. After installation, verify free rotation and check for any binding or excessive play. Apply appropriate lubrication as specified for the operating conditions.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the wrong ring during press fitting | Always apply force to the inner ring when mounting onto a shaft and to the outer ring when mounting into a housing to prevent internal damage to the bearing. |
| Insufficient or improper lubrication | Ensure the bearing is adequately lubricated with the correct type and amount of grease or oil specified for the application and operating environment before and during operation. |
A: This Deep Groove Ball Bearing is manufactured from Carbon Steel.
A: Electric Motors, Industrial Gearboxes, Pumps and Compressors.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||