This Aluminum 6061 deep groove ball bearing offers a lightweight and corrosion-resistant solution for moderate load applications. With precise dimensions, it ensures reliable power transmission in demanding industrial environments.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 73mm |
| Outside Diameter | 27mm |
| Width | 38mm |
A proven choice for industrial professionals, this deep groove ball bearing features an inside diameter of 73mm, an outside diameter of 27mm, and a width of 38mm. Constructed from Aluminum 6061, it provides excellent corrosion resistance and a favorable strength-to-weight ratio, making it suitable for applications where weight reduction and environmental tolerance are critical. Its design is optimized for radial and axial loads, delivering smooth and efficient rotational performance in machinery such as conveyors, electric motors, and pumps.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean both the shaft and the bearing housing thoroughly. 2. Carefully press the bearing onto the shaft, ensuring it is seated squarely and without excessive force. 3. Mount the assembly into the housing, verifying proper alignment before securing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, leading to brinelling or deformation of the races. | Utilize a proper bearing installer or press, applying force evenly to the inner race for shaft mounting and the outer race for housing mounting. |
| Incorrect shaft or housing fit, resulting in premature wear or looseness. | Ensure the shaft and housing dimensions adhere to the recommended fits for the specific bearing and application loads to maintain proper preload and clearance. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: Lightweight Conveyor Systems, Electric Motor Assemblies, Pump and Fan Units.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||