This robust Deep Groove Ball Bearing, crafted from corrosion-resistant Aluminum 6061, offers exceptional load-bearing capacity and smooth rotational performance for critical power transmission applications.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 27mm |
| Outside Diameter | 88mm |
| Width | 43mm |
Engineered for reliability and performance, this Deep Groove Ball Bearing features an inside diameter of 27mm, an outside diameter of 88mm, and a width of 43mm. Constructed from Aluminum 6061, it provides a superior strength-to-weight ratio and excellent corrosion resistance, making it ideal for environments where weight is a factor or where galvanic corrosion is a concern. Its design accommodates radial and axial loads in both directions, ensuring efficient power transfer and extended operational life in demanding industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing and shaft are clean and free of debris. 2. Carefully press the bearing onto the shaft or into the housing, applying even pressure to the outer ring if installing into the housing, or the inner ring if mounting onto the shaft. 3. Verify the bearing rotates freely without binding after installation. Use appropriate lubrication as per the application's requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force to the wrong ring during installation. | Always apply force to the ring that is being fitted directly to its mating component (inner ring to shaft, outer ring to housing). |
| Contaminating the bearing during installation. | Handle bearings in a clean environment and avoid direct contact with dirty tools or surfaces. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: Electric Motors, Gearboxes, Conveyor Systems, Pumps.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||