This brass deep groove ball bearing offers superior corrosion resistance and electrical conductivity. Engineered for precision and durability in demanding power transmission applications.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 61mm |
| Outside Diameter | 169mm |
| Width | 9mm |
A proven choice for industrial professionals, this brass deep groove ball bearing (61mm ID x 169mm OD x 9mm Width) delivers exceptional performance in environments where corrosion resistance is paramount. The inherent properties of brass, including its non-sparking nature and good thermal conductivity, make it suitable for applications involving potentially flammable atmospheres or where heat dissipation is critical. Its robust construction ensures reliable operation under moderate radial and axial loads, making it a dependable component for various machinery and equipment within the power transmission sector. This bearing is designed for smooth, low-friction rotation, contributing to overall system efficiency and longevity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seat and shaft are clean and free from debris. 2. Carefully press the bearing onto the shaft or into the housing, applying even pressure to the correct ring. 3. Verify free rotation of the bearing after installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force to the wrong ring during press-fit. | Ensure force is applied only to the ring being fitted (e.g., inner ring for shaft mounting, outer ring for housing mounting). |
| Improper lubrication leading to premature wear. | Use the recommended lubricant specified for the operating conditions and re-lubricate at appropriate intervals. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Electric Motors, Gearboxes, Conveyor Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||