This robust Deep Groove Ball Bearing, crafted from high-grade carbon steel, offers superior load-bearing capacity and minimal friction for efficient power transmission in demanding industrial environments.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 70mm |
| Outside Diameter | 28mm |
| Width | 45mm |
Manufactured under strict quality controls, this deep groove ball bearing features an inside diameter of 70mm, an outside diameter of 28mm, and a width of 45mm. Constructed from premium carbon steel, it provides excellent hardness, wear resistance, and compressive strength. Its single-row, non-separable design with a deep, uninterrupted raceway groove allows for high radial and axial loads in both directions, ensuring smooth operation and extended service life in various power transmission systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seat and shaft are clean and free from any debris or burrs. 2. Apply a thin, even layer of appropriate lubricant to the bearing's raceways and rolling elements. 3. Carefully press the bearing onto the shaft or into the housing using a suitable arbor press or bearing installer, ensuring it is seated squarely and without tilting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, leading to brinelling or deformation of the raceways. | Use a proper bearing press or installer, applying force only to the ring being mounted (inner ring on shaft, outer ring in housing) and ensuring even pressure distribution. |
| Improper lubrication, either insufficient or using the wrong type of lubricant, compromising performance and lifespan. | Consult the bearing manufacturer's recommendations for the correct lubricant type and quantity for the specific application and operating conditions. |
A: This Deep Groove Ball Bearing is manufactured from Carbon Steel.
A: Electric motors and generators, Gearboxes and transmissions, Conveyor systems and material handling equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||