This high-performance deep groove ball bearing, constructed from robust carbon steel, offers exceptional load-carrying capacity and smooth operation. Its design ensures reliable power transmission in demanding industrial environments.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 67mm |
| Outside Diameter | 140mm |
| Width | 13mm |
Specified by design engineers worldwide, this 67mm bore x 140mm outer diameter x 13mm width deep groove ball bearing is manufactured from premium carbon steel, renowned for its superior hardness, tensile strength, and wear resistance. This material composition ensures longevity and performance under significant radial and axial loads. Its precision tolerances enable reduced friction and heat generation, critical for extended service life in high-speed applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure shaft and housing surfaces are clean and free of debris. 2. Carefully apply even pressure to the bearing's inner ring to seat it onto the shaft or the outer ring to seat it within the housing. 3. Verify the bearing rotates freely and without binding after installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the outer ring when mounting onto the shaft. | Always apply mounting force exclusively to the inner ring when installing onto the shaft to prevent damage to the bearing raceways. |
| Improper lubrication leading to premature wear. | Utilize the manufacturer-recommended lubricant and ensure it is evenly distributed within the bearing cavity before operation. |
A: This Deep Groove Ball Bearing is manufactured from Carbon Steel.
A: Electric motors, Gearboxes, Conveyor systems, Pumps.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||