This deep groove ball bearing, crafted from robust carbon steel, offers exceptional load-bearing capacity and smooth rotational performance. Its design minimizes friction, ensuring efficient power transmission in demanding industrial applications.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 65mm |
| Outside Diameter | 193mm |
| Width | 12mm |
Precision-manufactured to tight tolerances, this carbon steel deep groove ball bearing features an inside diameter of 65mm, an outside diameter of 193mm, and a width of 12mm. The high-carbon steel construction provides excellent hardness and wear resistance, making it suitable for high-speed and heavy-duty applications. Its symmetrical groove geometry allows it to accommodate radial and axial loads in both directions, ensuring reliable operation and extended service life in various power transmission systems, including gearboxes, electric motors, and conveyor systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing bore and shaft are clean and free from debris. 2. Gently heat the bearing or cool the shaft to facilitate installation, avoiding direct impact. 3. Mount the bearing onto the shaft, ensuring it is seated squarely and fully.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, leading to brinelling or damage to raceways. | Use a proper bearing heater or induction heater for controlled heating, or a bearing press for even force application. Never hammer the bearing into place. |
| Improper lubrication, leading to premature wear and overheating. | Consult the bearing manufacturer's recommendations for the correct type and amount of lubricant. Ensure the lubricant is applied evenly and the correct grease fill is maintained. |
A: This Deep Groove Ball Bearing is manufactured from Carbon Steel.
A: Electric Motors, Gearboxes, Conveyor Systems, Pumps, Industrial Machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||