This robust carbon steel deep groove ball bearing offers superior load-carrying capacity and smooth operation. Engineered for reliability, it's a critical component for efficient power transmission in diverse industrial machinery.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 65mm |
| Outside Diameter | 180mm |
| Width | 50mm |
Built to exacting engineering tolerances, this deep groove ball bearing features an inside diameter of 65mm, an outside diameter of 180mm, and a width of 50mm. Constructed from high-grade carbon steel, it provides exceptional hardness, wear resistance, and load-bearing capabilities, ensuring consistent performance under significant radial and axial loads. Its precision design minimizes friction and heat generation, contributing to extended service life and operational efficiency in demanding power transmission systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean bearing and shaft thoroughly before installation. 2. Apply a light coat of appropriate lubricant to the shaft and inner ring bore. 3. Carefully press the bearing onto the shaft until it is fully seated against the shaft shoulder.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Forcing the bearing onto the shaft by hammering the outer ring. | Apply force only to the inner ring during shaft mounting or use a proper bearing press. |
| Inadequate lubrication leading to premature wear. | Ensure the correct type and amount of lubricant is applied according to application requirements and manufacturer guidelines. |
A: This Deep Groove Ball Bearing is manufactured from Carbon Steel.
A: Electric Motors, Gearboxes, Conveyor Systems, Industrial Pumps.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||