This deep groove ball bearing, constructed from lightweight yet robust Aluminum 6061, offers superior corrosion resistance and reduced inertia. Its precise dimensions ensure smooth, reliable operation in various power transmission systems.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 27mm |
| Outside Diameter | 108mm |
| Width | 12mm |
Manufactured under strict quality controls, this deep groove ball bearing boasts an inside diameter of 27mm, an outside diameter of 108mm, and a width of 12mm. The use of Aluminum 6061 provides an excellent strength-to-weight ratio, making it suitable for applications where mass reduction is critical without compromising load-bearing capacity. This material also offers inherent corrosion resistance, extending the service life in humid or chemically active environments. Its design minimizes friction and heat generation, contributing to energy efficiency and extended operational longevity in demanding industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the shaft and housing are clean and free from debris. 2. Gently press or tap the bearing onto the shaft until it is seated against the shoulder. 3. Carefully press or tap the bearing into the housing until it is fully seated.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to brinelling or damage to the raceways. | Employ a bearing press or a carefully controlled tapping method with appropriate tools. Apply force evenly to the outer ring when installing into the housing and to the inner ring when installing onto the shaft. |
| Incorrect shaft or housing fit, resulting in premature wear or operational issues. | Verify that the shaft and housing dimensions adhere to the recommended tolerances for the bearing. A slight interference fit is typically required. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: Electric Motors, Conveyor Systems, Industrial Machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||