Engineered for reliability, this deep groove ball bearing features a durable nylon construction. Its precise dimensions ensure smooth, efficient operation in demanding power transmission systems.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 74mm |
| Outside Diameter | 137mm |
| Width | 42mm |
Trusted by engineers across multiple sectors, this deep groove ball bearing (74mm ID, 137mm OD, 42mm Width) leverages the inherent advantages of its high-performance nylon composition. This material offers exceptional corrosion resistance, reduced weight, and good electrical insulation properties, making it ideal for environments where metal bearings may degrade or cause issues. The robust design ensures consistent load distribution and reduced friction, contributing to extended system life and optimal energy efficiency in various power transmission assemblies.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing and shaft are clean and free from contaminants. 2. Carefully press the bearing into the housing, applying even pressure to the outer ring. 3. Verify proper seating and smooth rotation before engaging with the load.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force to the inner ring during housing installation. | Always apply installation force to the outer ring when pressing the bearing into its housing to prevent damage to the raceways. |
| Improper shaft mounting, leading to misalignment. | Ensure the shaft is properly aligned and the bearing is seated flush on the shaft before applying any axial load. |
A: This Deep Groove Ball Bearing is manufactured from Nylon.
A: Conveyor systems, Electric motors, Industrial machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||