This deep groove ball bearing, constructed from high-quality carbon steel, is designed for efficient power transmission. Its robust build ensures smooth operation and longevity in demanding industrial environments.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 95mm |
| Outside Diameter | 160mm |
| Width | 13mm |
Built to exacting engineering tolerances, this 95mm inside diameter x 160mm outside diameter x 13mm width deep groove ball bearing is manufactured from high-carbon steel. This material provides excellent hardness and wear resistance, crucial for withstanding radial and axial loads. Its optimized raceway geometry minimizes friction and heat generation, ensuring efficient power transfer. Suitable for applications requiring consistent performance under moderate to heavy loads, including electric motors, pumps, and general machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seat and shaft are clean and free from debris. 2. Carefully press the bearing onto the shaft or into the housing, applying force to the inner or outer ring respectively to avoid damaging the raceways. 3. Verify the bearing rotates freely without binding after installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the bearing cage during installation. | Always apply force to the inner ring when mounting on the shaft and to the outer ring when mounting in the housing. |
| Using incorrect lubrication or insufficient lubrication. | Refer to the manufacturer's specifications for the appropriate lubricant type and quantity. |
A: This Deep Groove Ball Bearing is manufactured from Carbon Steel.
A: Electric Motors, Pumps and Compressors, Conveyor Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||