This robust deep groove ball bearing, crafted from high-grade carbon steel, is engineered for exceptional load-bearing capacity and smooth rotational performance in critical power transmission systems.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 58mm |
| Outside Diameter | 104mm |
| Width | 45mm |
A high-performance industrial component, this deep groove ball bearing features a precise 58mm inside diameter, a 104mm outside diameter, and a 45mm width. Constructed from premium carbon steel, it offers superior hardness, compressive strength, and wear resistance, ensuring longevity under significant radial and axial loads. Its design minimizes friction, contributing to efficient power transfer. Ideal for applications demanding reliability and sustained operational integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating shaft and housing surfaces are clean and free from burrs. 2. Apply a thin layer of appropriate lubricant to the bearing bore and shaft. 3. Carefully press the bearing onto the shaft, ensuring it seats fully and squarely. Avoid hammering directly on the bearing rings.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Incorrect alignment during mounting. | Utilize alignment tools or ensure shaft and housing are perfectly concentric before pressing. |
| Over-tightening or impact loading during installation. | Employ a controlled press fit or induction heater; never strike the bearing directly with a hammer. |
A: This Deep Groove Ball Bearing is manufactured from Carbon Steel.
A: Electric Motors, Gearboxes, Conveyor Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||