This high-performance deep groove ball bearing, constructed from robust carbon steel, offers exceptional load-carrying capacity and smooth rotational performance. Engineered for critical power transmission applications, it ensures reliable operation under demanding conditions.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 56mm |
| Outside Diameter | 149mm |
| Width | 17mm |
A proven choice for industrial professionals, this deep groove ball bearing features an inside diameter of 56mm, an outside diameter of 149mm, and a width of 17mm. Manufactured from high-grade carbon steel, it provides superior hardness, wear resistance, and a high fatigue limit, crucial for enduring continuous operational stress. The optimized raceway geometry minimizes friction and heat generation, contributing to extended service life and reduced maintenance requirements in high-speed and heavy-duty machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the bearing bore and shaft thoroughly before installation. 2. Apply a thin layer of appropriate lubricant to the shaft and inner ring. 3. Carefully press the bearing onto the shaft, ensuring it is seated squarely and fully. 4. Install the bearing into its housing, again ensuring a snug and square fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Forcing the bearing onto the shaft or into the housing | Use a proper bearing press or induction heater for controlled and even mounting to avoid brinelling or deformation. |
| Contaminating the bearing during installation | Maintain a clean environment and handle the bearing with clean hands or tools to prevent grit ingress. |
A: This Deep Groove Ball Bearing is manufactured from Carbon Steel.
A: Electric Motors, Gearboxes, Conveyor Systems, Pumps and Compressors.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||