This robust deep groove ball bearing, crafted from high-grade carbon steel, offers exceptional load-bearing capacity and smooth operation. Its precise construction ensures reliable performance in diverse power transmission applications.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 55mm |
| Outside Diameter | 65mm |
| Width | 11mm |
Precision-manufactured to tight tolerances, this carbon steel deep groove ball bearing features an inside diameter of 55mm, an outside diameter of 65mm, and a width of 11mm. The inherent hardness and wear resistance of carbon steel make it ideal for applications experiencing moderate to heavy radial and axial loads. Its symmetrical design allows for the accommodation of loads in both directions. This bearing is engineered for minimal friction and heat generation, contributing to extended service life and reduced energy consumption in machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure bearing and shaft surfaces are clean and free from contaminants. 2. Carefully press the bearing onto the shaft, applying even force to the inner ring. 3. Seat the bearing fully within its housing, again ensuring even pressure on the outer ring.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the outer ring when mounting on the shaft. | Always apply mounting force exclusively to the ring (inner or outer) that is being press-fitted. |
| Improper lubrication, leading to premature wear. | Use the recommended type and quantity of lubricant specified for the operating conditions and bearing type. |
A: This Deep Groove Ball Bearing is manufactured from Carbon Steel.
A: Electric Motors, Gearboxes, Conveyor Systems, Pumps.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||