Engineered for superior performance, this deep groove ball bearing features a robust Aluminum 6061 construction. Its precise dimensions ensure efficient operation in critical power transmission systems.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 54mm |
| Outside Diameter | 138mm |
| Width | 8mm |
A high-performance industrial component, this deep groove ball bearing is precision-machined from Aluminum 6061, offering an excellent balance of strength, lightweight properties, and corrosion resistance. With an inside diameter of 54mm and an outside diameter of 138mm, and a slim width of 8mm, it is designed for applications requiring low friction and high rotational speed. The Aluminum 6061 alloy provides good machinability and heat treatability, ensuring consistent performance under moderate load conditions in environments where weight is a consideration or where non-magnetic properties are beneficial.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean bearing housing and shaft thoroughly. 2. Apply a thin film of appropriate lubricant to the bearing outer ring and housing bore. 3. Gently press the bearing into the housing, ensuring it is seated squarely.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, leading to brinelling. | Use a bearing press or a properly sized drift to apply even pressure only to the outer ring of the bearing during installation into the housing. |
| Contaminating the bearing during handling or installation. | Handle bearings in a clean environment and avoid direct contact with hands. Keep bearing packaging sealed until ready for installation. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: Electric motors, Gearboxes, Conveyor systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||