Engineered for efficient power transmission, this deep groove ball bearing features a lightweight yet robust Aluminum 6061 construction. Its precise dimensions ensure smooth operation and reliable performance in demanding industrial environments.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 49mm |
| Outside Diameter | 71mm |
| Width | 19mm |
A high-performance industrial component, this deep groove ball bearing is precision-machined from Aluminum 6061, offering excellent corrosion resistance and a favorable strength-to-weight ratio. With an inside diameter of 49mm, an outside diameter of 71mm, and a width of 19mm, it is designed for optimal load distribution and reduced friction in rotational applications. The inherent properties of Aluminum 6061 make this bearing suitable for environments where traditional steel bearings may degrade, ensuring extended service life and consistent performance in various power transmission systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mounting surfaces are clean and free of debris. 2. Carefully press the bearing into its designated housing, applying even pressure to avoid misalignment. 3. Verify smooth rotation and secure seating before engaging power transmission.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening during press-fit installation, leading to brinelling of raceways. | Use a proper bearing installation tool or press with controlled force and ensure the housing is to the correct tolerance. |
| Applying load on the outer ring during initial seating when it should be on the inner ring. | Always ensure the load is applied to the ring that is being fitted into its respective component (shaft or housing). |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: Electric Motor Shafts, Conveyor Systems, Gearbox Assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||