This brass deep groove ball bearing offers superior load-bearing capacity and reduced friction. Its robust brass construction ensures excellent corrosion resistance and thermal conductivity, making it ideal for demanding power transmission systems.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 67mm |
| Outside Diameter | 139mm |
| Width | 42mm |
Engineered for reliability and performance, this deep groove ball bearing features a precise 67mm inside diameter, a robust 139mm outside diameter, and a 42mm width. Constructed from high-quality brass, it exhibits excellent machinability, inherent corrosion resistance, and good thermal conductivity, crucial for dissipating heat generated during operation. This configuration is optimized for high radial and moderate axial loads, providing smooth, low-friction rotational movement in a variety of industrial environments. Its design minimizes vibration and noise, contributing to overall system efficiency and longevity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seat and shaft are clean and free from debris. 2. Carefully press the bearing onto the shaft or into the housing, applying even pressure to the correct ring (inner for shaft, outer for housing). 3. Verify smooth rotation and proper seating before applying load.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying impact force to the bearing cage during installation. | Apply force evenly to the ring that is being pressed onto its mating surface (either the inner ring onto the shaft or the outer ring into the housing). |
| Contaminating the bearing during installation. | Handle the bearing with clean hands or tools and install in a clean environment to prevent ingress of dirt or debris. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Industrial Gearboxes, Electric Motors, Conveyor Systems, Pumps.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||