This robust deep groove ball bearing, crafted from high-grade carbon steel, offers exceptional load-carrying capacity and smooth rotational performance for critical power transmission systems.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 47mm |
| Outside Diameter | 22mm |
| Width | 43mm |
Specified by design engineers worldwide, this deep groove ball bearing features an inside diameter of 47mm, an outside diameter of 22mm, and a width of 43mm. Constructed from premium carbon steel, it exhibits superior hardness, wear resistance, and compressive strength, ensuring longevity under radial and axial loads. Its precisely machined raceways and high-quality balls minimize friction and heat generation, making it ideal for high-speed operations and demanding industrial environments where reliability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure shaft and housing bores are clean and within specified tolerances. 2. Apply a light coating of appropriate lubricant to the bearing and shaft. 3. Carefully press the bearing onto the shaft or into the housing, ensuring even pressure is applied to the outer ring.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Forcing the bearing onto the shaft using excessive hammer blows. | Utilize a bearing press or a properly sized drift to apply even pressure to the outer ring during installation. |
| Incorrect lubrication, leading to premature wear. | Consult the bearing manufacturer's specifications for the correct lubricant type and quantity for the intended operating conditions. |
A: This Deep Groove Ball Bearing is manufactured from Carbon Steel.
A: Electric motors, Gearboxes, Conveyor systems, Pumps, Industrial machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||