This robust deep groove ball bearing, constructed from durable carbon steel, is engineered for exceptional radial and axial load capacity. Its precise dimensions ensure smooth, low-friction operation in critical power transmission systems.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 65mm |
| Outside Diameter | 71mm |
| Width | 49mm |
A proven choice for industrial professionals, this deep groove ball bearing is manufactured from high-grade carbon steel, renowned for its strength and wear resistance. Featuring an inside diameter of 65mm, an outside diameter of 71mm, and a width of 49mm, it is designed for optimal performance in applications requiring efficient power transmission and sustained operational integrity under moderate loads. The hardened raceways and precision-ground balls minimize friction and heat generation, contributing to extended service life and reduced maintenance requirements in demanding environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the shaft and housing bores are clean and within specified tolerances. 2. Carefully align the bearing with the shaft and apply even pressure for insertion. 3. Secure the bearing using appropriate retaining rings or housing configurations.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cleaning of mating surfaces leading to contamination. | Thoroughly clean shaft and housing bores with a lint-free cloth and approved degreaser before installation. |
| Applying excessive or uneven force during installation, causing brinelling or misalignment. | Utilize a proper bearing press or induction heater for installation, ensuring uniform pressure and alignment. |
A: This Deep Groove Ball Bearing is manufactured from Carbon Steel.
A: Industrial Gearboxes, Electric Motors, Conveyor Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||