This deep groove ball bearing, constructed from robust carbon steel, offers exceptional radial and axial load capacity. Its precise dimensions ensure smooth, low-friction operation for efficient power transmission in various industrial settings.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 43mm |
| Outside Diameter | 58mm |
| Width | 8mm |
Manufactured under strict quality controls, this deep groove ball bearing features a 43mm inner diameter, 58mm outer diameter, and an 8mm width. Constructed from high-grade carbon steel, it provides superior hardness and wear resistance for prolonged operational life. The raceway geometry is optimized for high-speed applications, minimizing vibration and noise while delivering consistent performance under significant radial and axial loads. Its robust material composition ensures reliability in moderate temperature environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the shaft and housing bore thoroughly before installation. 2. Carefully press the bearing onto the shaft, ensuring it is seated squarely and without tilting. 3. If installing into the housing, lightly oil the housing bore and gently press the bearing into place.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Forcing the bearing during installation. | Use a bearing press or appropriate tooling to apply force evenly to the ring being fitted (inner ring on shaft, outer ring in housing) to avoid brinelling or damage. |
| Incorrect lubrication during assembly or operation. | Ensure the bearing is adequately lubricated with the correct type and amount of grease or oil specified for the application to prevent premature wear. |
A: This Deep Groove Ball Bearing is manufactured from Carbon Steel.
A: Electric Motors, Pumps, Conveyor Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||