Engineered for exceptional load-bearing capacity and smooth rotational performance, this deep groove ball bearing is a critical component in power transmission systems. Its robust carbon steel construction ensures longevity under rigorous operating conditions.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 43mm |
| Outside Diameter | 181mm |
| Width | 36mm |
Specified by design engineers worldwide, this deep groove ball bearing features a precise 43mm inside diameter, a substantial 181mm outside diameter, and a 43mm width. Constructed from high-quality carbon steel, it exhibits excellent hardness and wear resistance, making it suitable for moderate to heavy radial and axial loads. Its design minimizes friction, contributing to energy efficiency and extended service life in applications demanding reliability and precision.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing and shaft are clean and free from contaminants. 2. Apply a thin, even layer of appropriate lubricant to the bearing raceways and the shaft. 3. Carefully press the bearing onto the shaft or into the housing using a suitable arbor press or bearing induction heater, ensuring it is seated squarely.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to brinelling or damage to the raceways. | Utilize a bearing press or induction heater for controlled force application, or a soft-faced hammer for light tapping. |
| Incorrect lubrication, either insufficient or using the wrong type of lubricant, causing premature wear. | Consult the bearing manufacturer's specifications for recommended lubricant type and quantity, and ensure proper application. |
A: This Deep Groove Ball Bearing is manufactured from Carbon Steel.
A: Electric Motors and Generators, Gearboxes and Transmissions, Industrial Pumps and Compressors.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||