This deep groove ball bearing, crafted from robust carbon steel, offers exceptional load-bearing capacity and efficient operation. Its precise dimensions ensure reliable performance in critical power transmission applications.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 43mm |
| Outside Diameter | 148mm |
| Width | 22mm |
A high-performance industrial component, this deep groove ball bearing is precisely engineered with an inside diameter of 43mm, an outside diameter of 148mm, and a width of 22mm. Constructed from durable carbon steel, it exhibits excellent hardness and wear resistance, crucial for withstanding continuous operational stresses. The internal geometry is optimized for high radial and moderate axial loads, ensuring smooth, low-friction rotation. This makes it ideal for applications requiring reliable power transfer and long service life under demanding conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing and shaft are clean and free from debris. 2. Carefully press the bearing onto the shaft or into the housing using appropriate tools, applying even pressure to the correct ring. 3. Verify that the bearing rotates freely and without excessive play after installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying impact force to the wrong ring during press-fitting. | Always apply force to the ring that is being fitted (e.g., to the inner ring when mounting on a shaft). |
| Insufficient lubrication or using the wrong lubricant type. | Apply a sufficient quantity of the recommended lubricant before and during operation, consulting the bearing manufacturer's guidelines. |
A: This Deep Groove Ball Bearing is manufactured from Carbon Steel.
A: Electric Motors, Gearboxes, Conveyor Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||