This deep groove ball bearing is engineered for exceptional load-bearing capacity and extended service life. Constructed from robust carbon steel, it delivers reliable performance in demanding industrial environments.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 43mm |
| Outside Diameter | 132mm |
| Width | 24mm |
Purpose-built for heavy-duty applications, this deep groove ball bearing boasts an inside diameter of 43mm, an outside diameter of 132mm, and a width of 24mm. Manufactured from premium carbon steel, it offers superior hardness and wear resistance, ensuring robust performance under significant radial and axial loads. Its precision-engineered raceways and high-quality balls minimize friction and heat generation, contributing to enhanced efficiency and prolonged operational lifespan. Ideal for applications requiring high reliability and durability in power transmission systems, machinery, and industrial equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the bearing bore and shaft thoroughly before installation. 2. Apply a thin, even layer of appropriate lubricant to the shaft and the inner ring of the bearing. 3. Carefully press the bearing onto the shaft, ensuring it is seated squarely and without excessive force. Avoid hammering directly on the bearing rings.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force or impact during installation, leading to brinelling or damage to the raceways. | Employ a bearing press or induction heater for controlled and even installation. Ensure the force is applied to the inner ring when mounting on a shaft. |
| Insufficient or incorrect lubrication, resulting in premature wear and overheating. | Consult the bearing manufacturer's specifications for the correct type and quantity of lubricant. Re-lubricate at recommended intervals based on operating conditions. |
A: This Deep Groove Ball Bearing is manufactured from Carbon Steel.
A: Industrial Gearboxes, Electric Motors, Conveyor Systems, Pumps.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||