Engineered for robust power transmission, this Deep Groove Ball Bearing features a lightweight yet strong Aluminum 6061 construction. Its precise dimensions ensure smooth, low-friction operation in diverse industrial environments.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 65mm |
| Outside Diameter | 135mm |
| Width | 20mm |
Manufactured under strict quality controls, this deep groove ball bearing boasts an inside diameter of 65mm, an outside diameter of 135mm, and a width of 20mm. Constructed from premium Aluminum 6061, it offers an excellent strength-to-weight ratio, superior corrosion resistance, and good machinability, making it ideal for applications where weight reduction is critical without compromising structural integrity. This bearing is designed for high-speed operation and significant radial and axial loads, commonly found in electric motors, pumps, and automated machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure shaft and housing surfaces are clean and free of debris. 2. Carefully press the bearing onto the shaft using an appropriate bearing installer or hydraulic press, applying force evenly on the inner ring. 3. Gently press the housing onto the bearing outer ring, ensuring proper alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force to the outer ring during shaft installation. | Always apply installation force only to the ring being fitted (inner ring for shaft, outer ring for housing). |
| Improper alignment leading to binding or premature wear. | Ensure the shaft and housing are perfectly aligned before pressing the bearing into place. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: Electric Motors, Pumps and Compressors, Automated Manufacturing Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||