This deep groove ball bearing, constructed from lightweight yet robust Aluminum 6061, is engineered for smooth, low-friction rotation in critical power transmission systems. Its precise dimensions ensure reliable performance.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 49mm |
| Outside Diameter | 83mm |
| Width | 48mm |
Built to exacting engineering tolerances, this deep groove ball bearing features an inside diameter of 49mm, an outside diameter of 83mm, and a width of 48mm. The utilization of Aluminum 6061 provides an excellent strength-to-weight ratio, superior corrosion resistance, and good thermal conductivity, making it ideal for environments where weight reduction and operational temperature are key considerations. This bearing is designed for moderate radial and axial loads, ensuring efficient power transfer and extended service life in demanding industrial machinery and automation equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing and shaft are clean and free of debris. 2. Carefully press the bearing onto the shaft or into the housing, applying even force to the inner or outer ring respectively. 3. Verify smooth rotation and proper seating before engaging the power transmission system.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the wrong ring during installation. | Always apply mounting force to the ring that is being directly fitted to the shaft or housing to avoid damaging the bearing raceways. |
| Improper lubrication or contamination during installation. | Ensure the bearing is properly lubricated according to manufacturer specifications and protect it from contaminants during the installation process. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: Electric Motors, Gearboxes, Conveyor Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||