This deep groove ball bearing, constructed from robust carbon steel, offers exceptional load-bearing capacity and smooth operation. Its precise dimensions ensure optimal performance in demanding power transmission systems.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 38mm |
| Outside Diameter | 177mm |
| Width | 28mm |
Specified by design engineers worldwide, this deep groove ball bearing (38mm ID x 177mm OD x 28mm Width) is manufactured from high-grade carbon steel, ensuring superior hardness, wear resistance, and load-carrying capabilities. The hardened raceways and precision-ground balls minimize friction and heat generation, enabling extended service life even under continuous operational stress. Its symmetrical design accommodates radial and axial loads in both directions, making it a versatile component for a wide array of industrial machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the shaft and housing bore are clean and free from burrs or contaminants. 2. Apply a thin, uniform layer of appropriate lubricant to the bearing bore and shaft or housing. 3. Carefully press the bearing onto the shaft or into the housing using a press or a suitable bearing fitting tool, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to brinelling or deformation of the raceways. | Utilize a proper press or induction heater for installation, applying force only to the ring being fitted (i.e., inner ring on shaft, outer ring in housing). |
| Contamination of the bearing during handling and installation, compromising lubrication and lifespan. | Keep bearings in their original packaging until ready for installation. Work in a clean environment and use clean tools. |
A: This Deep Groove Ball Bearing is manufactured from Carbon Steel.
A: Electric Motors, Gearboxes, Pumps, Conveyor Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||