Engineered for robust performance, this deep groove ball bearing features a high-quality carbon steel construction. It offers exceptional load-bearing capacity and smooth operation in demanding power transmission systems.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 35mm |
| Outside Diameter | 81mm |
| Width | 33mm |
Manufactured under strict quality controls, this deep groove ball bearing boasts a precise 35mm inside diameter, 81mm outside diameter, and a 33mm width. Constructed from premium carbon steel, it exhibits excellent hardness, wear resistance, and fatigue strength, ensuring reliable operation under radial and axial loads. Its design minimizes friction, enabling efficient power transfer in high-speed and moderate-temperature environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing and shaft are clean and free from debris. 2. Apply a thin film of appropriate lubricant to the shaft and the inner bore of the bearing. 3. Carefully press the bearing onto the shaft using a bearing press or a suitable sleeve until it is seated flush.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, potentially damaging the bearing races. | Utilize a bearing press or inductive heater for controlled and even force application. |
| Contaminating the bearing during handling or installation. | Keep the bearing in its original packaging until immediately before installation and work in a clean environment. |
A: This Deep Groove Ball Bearing is manufactured from Carbon Steel.
A: Electric Motors, Gearboxes, Pumps, Conveyor Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||