This deep groove ball bearing, constructed from robust carbon steel, offers exceptional load-bearing capacity and smooth operation. Its precision engineering ensures reliability for critical power transmission applications.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 35mm |
| Outside Diameter | 79mm |
| Width | 48mm |
A proven choice for industrial professionals, this deep groove ball bearing features a 35mm inside diameter, 79mm outside diameter, and a 48mm width. Manufactured from high-quality carbon steel, it exhibits excellent hardness and wear resistance, making it suitable for environments subjected to moderate to heavy radial and axial loads. The raceway geometry is optimized for high-speed operation and low friction, contributing to extended service life and energy efficiency in machinery such as electric motors, gearboxes, and agricultural equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seat and shaft are clean and free from debris. 2. Carefully press the bearing onto the shaft or into the housing using a suitable press or fixture, applying even force to the correct ring. 3. Verify the bearing rotates freely after installation and that clearances are within specified tolerances.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force directly to the cage or rolling elements during installation. | Always apply installation force evenly to the ring (inner or outer) that is being fitted to its mating component. |
| Using incorrect lubrication or insufficient lubrication. | Consult the bearing manufacturer's specifications for the recommended lubricant type and quantity based on operating conditions. |
A: This Deep Groove Ball Bearing is manufactured from Carbon Steel.
A: Electric Motors, Gearboxes, Pumps.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||